| The safety, productivity and quality
of the Belt Loop Processor is second to none in the industry and
the price is competitive. Expanding further on these three points:
QUALITY
Based on a field test conducted by a large manufacturer in Tennessee.
The BL1000 Belt Loop was compared against a competitors similar
sized machine. The comparison machine had been used in the factory
for several years. The standard production speed and temperature
for this machine for 14 oz Denim with 3 mil film was 450 F and
45 feet per minute.
| Features:
- Adjustable speed control
- Top and bottom heat
- Microprocessor function control
- Pneumatic loading platform
- Adjustable loop tensioning device
- Safety cut off switches
- Beltless design
|
After running the BL1000 with identical materials, that standard
was bested at 360 F at 45 feet per minute. The lower temperature
produced a more flexible loop with a better band while at the
same time eliminating a productivity problem further down the
production line. The final results was a 40% increase in furing
productivity and a gain in quality end product.
PRODUCTIVITY
The unique three heated plate system keeps both sides of the
loop in contact with the heated plate the entire time that the
loop is in the machine.
| Model |
BL1000 |
| Machine Width |
35 in.
(89 cm) |
| Machine Length (w/ table only) |
69 in.
(175 cm) |
| Machine Height (BL1000 w/ Stand) |
52 in
(132 cm) |
| Belt Speed |
60 ft/m
(18.2m/m) |
| Power Requirements |
220/3/6 |
| Net Weight |
400 lbs
(181 kgs) |
This greatly decreases the time for the heat to penetrate the
fabric and melt the film. Thirty-three feet of double-sided heat
allows for up to 100-feet per minute speeds at a 3.3 second dwell
time.
|
Print
